Cheap Jerseys Entrust your batteries to Cadex
The Cadex C7x00 Series battery analyzers offer a platform that fulfills virtually all battery testing and conditioning needs. With features such as QuickSort™ that checks lithium-ion batteries in 30 seconds, and Boost that revives dead packs, the C7x00 truly masters battery testing. Slide a battery into one of our 1,500 custom Battery Adapters, or use a Universal Adapter and you will discover why the C7x00 has become the world’s leading battery analyzer.
- Over 1,500 custom SnapLock™ Battery Adapters available
- 18 programs provide automated battery testing
- QuickSort™ tests lithium-ion batteries in 30 seconds
- Boost™ restores batteries that have been discharged too low
- Operates as standalone or with BatteryShop™ software
The C7x00 Series is covered by US patent 7,072,871: Fuzzy logic
method and apparatus for battery state of health determination.
C7200 Battery Analyzer (40 Watts)
|The two-station Cadex C7200 suits smaller organizations and storefront operations. 40 watts of charge power at 4 amps per station ensure quick service of larger batteries. This economical analyzer offers similar features to the larger C7400.
Part Number: 07-720-0100
C7400 Battery Analyzer (80 Watts)
|With four-stations and 80 watts of charge power, the Cadex C7400 is most economical in terms of cost per station. The extra stations increase throughput and add flexibility in accommodating batteries that require immediate service.
Part Number: 07-740-0100
C7400ER Battery Analyzer (170 Watts)
|The Cadex C7400ER is the most powerful of the C7000 Series battery analyzers. Six amps per station, service of 36 volt batteries and 170 watts of continuous power satisfies most service requirements.
Part Number: 07-740-1100
|The Cadex C7x00 Series battery analyzers are more than programmable power supplies to charge and discharge batteries; they assess the condition of a battery and provide intelligence to safely service them. Protected algorithms with redundant safety features identify a faulty battery and terminate the service with message when so needed.|
|The green light on the charger does not reflect battery performance. “Ready” simply indicates that the battery is fully charged.
A battery should be replaced when the capacity drops to 70–80%. Most users are unaware of capacity fade until an unforeseen power loss occurs. Nor should a battery be replaced too soon. The Cadex C7x00 Series battery analyzer enables to keep batteries for their optimal life span.
|The C7x00 analyzer test batteries by a discharge/charge cycles or a rapid-test function. A full cycle is the most reliable method but it is not practical for large batteries. Rapid-testing is not available for all batteries.|
Reactivating lithium-ion batteries*
The 30-second Rapid-test
Target Capacity sets battery pass/fail
Security safeguards against tampering
|Password protection prevents unauthorized changes of settings. Level 1 allows minor changes and Level 2 inhibits most programming.|
Automated programs support all your battery needs and the 18 available service programs are grouped below into Basic, Advanced and Custom.
- Auto – Exercises the batteries and applies Recondition if the user-set target capacity cannot be reached
- Charge – Applies a fast charge only
- Prime – Prepares batteries for field use by repeated cycling until the maximum capacity is reached
- QuickSort™ – Sorts lithium-ion packs into Good, Low and Poor in 30 seconds
- Self-Discharge – Determines the rate at which a battery loses charge
- Life Cycle – Counts number of charge/discharge cycles before the battery capacity drops to selected target level
- Discharge Only – Discharges battery for storage; tests chargers
- Extended Prime – Applies a 16-hour trickle charge, followed by Prime. Prepares difficult to charge batteries
- OhmTest – Measures internal battery resistance in 6 seconds
- Runtime – Simulates field application with three adjustable load currents and time intervals
- Boost – Reactivates seemingly dead batteries that have been discharged too low
- QuickTest™ – Provides battery state-of-health in 3 minutes. Needs specific battery matrix
- Q-Learn – Provides initial QuickTest™ matrix by scanning a good battery. Service time is 3-5 minutes
- Learn – Improves QuickTest™ matrix by scanning batteries with different state-of-health status. Service time is 3-8 hours per battery
Four separate Custom programs allow user-defined programs composed of charge, discharge, recondition, wait and repeats. The programs follow a different path if a certain condition occurs.
No system is complete without well-designed software. PC-BatteryShop™ enhances the Cadex C7x000 Series battery analyzers by being able to observe voltage, current and temperature in real-time graphics. Advance the Cadex analyzer into a true workhorse.
Moving the controls to the PC
Maintaining fleet batteries
Useless Batteries made Valuable
|Warranty batteries, and those that had been returned, no longer need to be discarded. Studies show that 90% of returned mobile phone batteries can be restored with Cadex battery analyzers. The QuickSort™ program provides a clear assessment of the battery condition in 30 seconds.
Battery testing has become a viable business model that earns money and saves the environment. For storefront service, visit our C5100.
Maintaining consistent quality in battery manufacturing
|With PC-BatteryShop™, the PC becomes the command center from which to enter parameters and program sequences. You can customize charge terminations, fine-tune the end-of-discharge thresholds, and observe voltage, current and temperature in real-time graphics on the PC monitor. Cadex analyzers will test batteries at a fraction of cost to competitive systems.|
Custom Battery Adapters
RIGIDARM™ UNIVERSAL ADAPTER
FLEXARM™ UNIVERSAL ADAPTER
Attention Flexarm, Rigidarm and Smart Cable users: The above adapters are not for use with Li-ion batteries on the following Cadex Models: C7000, C7000ER, BOS.
They are safe to use with LI-ion batteries on the following models: C7200, C7400, C7400ER.
|Battery voltage range||1.2 to 15V||1.2 to 15V||1.2 to 36V (28.8V for nickel-based)|
|Charge/discharge current||100mA to 4A in 25mA increments||100mA to 4A in 25mA increments||100mA to 6A in 25mA increments (With 6A capable Battery Adapters)|
|If current is set above 4A (6A), unit automatically scales down to stay within range. Services up to 24Ah batteries.|
|Maximum charge power||40W per station; 40W total||55W per station; 80W total||75W per station; 170W total|
|Maximum discharge power||35W per station; 70W total||35W per station; 140W total||75W per station; 200W total|
|Power management||Batteries on a fully loaded system may go on waiting queue. Will resume when demand moderates.|
|Line voltages||100 to 240VAC, 50-60Hz 1.5A max||100 to 240VAC, 50-60Hz 1.75A max||100 to 120 / 200 to 240VAC, 50-60Hz; 4A max|
|Chemistries||Lithium-ion, nickel-metal-hydride, nickel-cadmium, lead-acid|
|Charge method||Lithium-ion and lead-acid: constant voltage with current limit. Nickel-based: constant current with Reverse Load Charge adjustable from 5-12%. Customized charge methods possible. Automatic full charge detection, safe termination under all conditions. Temperature controlled.|
|Discharge method||Constant discharge current to end-of-discharge voltage threshold.|
|Battery adapters||SnapLock™ system; custom and universal types. Contain C-code that configures analyzer to the correct setting. Each adapter has room for 10 C-codes. Re-programmable possible with menu function. Battery Adapters are equipped with a temperature sensor.|
|Service programs||18, grouped into Basic, Advanced and Custom programs. Allows manual and automated service.|
|Security||Level 1 – Off, allows full access, no programming restrictions (default)
Level 2 – Low, password protected; allows C-code selection and display options
Level 3 – High, password protected; most programming choices locked
|Display||2×40-character LCD, backlit; each station also features RUN, READY, FAIL signal lights.|
|Power failure recovery||Retains the test data on power failure and resumes when power is restored. Time on power failure and resumption is recorded.|
|Data ports||RS-232 or USB interfaces to PC (RS-232 recommended). Label printer for direct connection available.|
Fleet of 80 batteries typical
Fleet of 160 batteries typical
Fleet of 160 batteries typical
|Throughput on full service is based on monthly maintenance. Each analyzer services two battery batches every 24h (day and night run), 20 days per month.|
7.1 lb; 3.2 kg
10.05 lb; 4.54 kg
12.1lb; 5.5 kg
|Environmental||Recommended operating temperature 41F to 95 F; 5C to 35C
Recommended storage temperatures –4F to 159F; -20C to 70C
|Firmware||Upgradeable with BatteryShop™ over the Internet, flash memory. Lifetime upgrade subscription available.|
|Approvals||Tested and approved by ITS to comply with CSA/UL/CE standards. RoHS and WEEE compliant.|
|Warranty||Cadex warrants the analyzer against defective materials and workmanship for a period of two (2) years from the original purchase date.|
* Specifications subject to change